Tankless Water Heater Repair Alpharetta GA

Tankless Water Heater Repair Alpharetta GA Troubleshooting

Normally, many of the problems that could accompany a tankless water heater, causing it to require a repair are external elements. Below are some of them:Tankless Water Heater Repair Alpharetta GA

  • The venting is not proper. The most typical error is the use of normal B-vent, which can swiftly destroy the heat exchanger due to acidic condensation.
  • Inspect the gas supply line. Often the supply line is undersized and was just connected to the existing line size. The size specified in the setup handbook has to be made use of.
  • The gas pressure is not appropriate. The working pressure must be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the design.
  • The incorrect type of gas that is being made use of – natural gas or liquid propane. It is not possible to utilize the non-specified kind.
  • Water flow or temperature level variation problems. There are several things we will inspect to see to it they are working effectively, like cleaning or replacing the input filter, examining the check valve, checking the seals in the faucets and looking to see if there is a cross flow somewhere that has to be repaired.
  • Hard Water Problems: In locations where the water is extremely hard, de-scaling will be required occasionally.
  • Environmental problems. The heaters ought to be installed in a clean area with access to combustion air that is free from dust, lint, grease, or chemicals.

Back to Water Heater Repair Alpharetta GA