Explanations Why a Hot Water Tank Will Explode

Posted by on Jan 22, 2015 in Gas Water Heater Repair Alpharetta GA, Water Heater Repair Alpharetta GA, Water Heater Safety

With regards to needing to perform servicing on ones water heater, it is a pretty minimal maintenance home appliance.  Nevertheless, one essential aspect of it needs to be checked out routinely.  Water Heater Repair Alpharetta GA would like to pass on this safety material regarding ones water heater today.Water Heater Repair Alpharetta

Extreme temperature if joined with tank deterioration inside the storage tank causes an explosion. If the water temperature is less than 212 degrees Fahrenheit, one is going to be secure from an explosion, though there is a threat of scalding at that temperature.  However, if the water temperature is greater than 212 degrees, water becomes into steam, which will enlarge to 1,700 times the space it takes up as water. This is the time an explosion can also occur.

Cautionary Indications of a Water Heater Explosion

The leading sign is if one goes to get hot water from a faucet and only steam comes out.  Promptly shut off electric power if one owns an electric water heater.  If one owns a gas hot water heater, shut off the gas valve on the water heater.  And then, give us a call to come examine the condition.

Minimizing Potential Water Heater Dangers

The most crucial upkeep activity having a water heater is to check the pressure relief valve, also referred to as the T&P valve, on a standard schedule.   This valve helps manage the pressure accumulation inside of the water storage tank to protect against a risky increase in temperature and overpressure.

Caution!
Remember, the water release out of a T&P valve may be quite hot. If you do not feel at ease examining the valve inform us.  Additionally, carrying out any sort of fixes to the valve really should be carried out by a specialized plumbing repair business.

How to Test the T&P Valve

Clear the place close to the overflow pipe and floor drain.
Raise the test handle for around 5 seconds or until the water runs clean.
Let go of the handle.
If the T&P valve keeps on running with water, lift up the handle up and down rapidly to have it reseat itself.  One might have to do this a several times.  IF it has not been tested for a while, it might be difficult to raise it at first.  Avoid using excessive force, however might need to utilize just a little.
If the T&P valve continues to leak, it needs to be changed.

Some other items to watch out for are deterioration on the stem of the valve.  If there is any water dripping out of the valve stem or out of the drain valve.

Seeking far more ideas?  Have a look at Water Heater Repair Alpharetta’s additional articles right here:

New Changes to Water Heater Regulations

Alpharetta Water Heating Savings Advice

From around the Web:

The Aquanta smart water-heater controller promises to slash your energy bill

Home maintenance checklist: Fall